Luminescent lamp

Luminescent lamp with the cold cathode, “almost” unfamiliar Universe

Often we look for inexpensive lighting decisions, in most cases, because of a lack of time, information, underestimation of importance of a problem and absence of alternative. And only upon termination of works we start realizing that high energy consumption and high cost of maintenance make our choice expensive and a little functional. New green technologies are aimed at reduction of amount of the material which is subject to replacement and utilization, the strong light stream for many years five times surpassing a luminescent lamp. Lamps with the cold cathode are the luminescent lamps made separately, a craft way by professional glass blowers. In most cases the equipment is installed together with transformers which power doesn’t exceed 1000V. According tothe standards this equipment – a low voltage.
Transformers are equipped with all necessary built-in protective elements, they protect from electric discharges, including, in case of casual contact with one of the feeding lamp wires. Lamps which we make, correspond to the standard of EN 50107, can be established in the rain and perfectly work even in the absence of any additional protection. Lamps with the cold cathode can’t be established in water. Thus it is necessary to know, what even in case of casual immersion contact with water won’t cause an electric discharge.
Flasks by diameter from 6mm to 25mm, with sections in ascending order are presented in our catalog of lamps: 6mm, 8 mm, 10 mm, 12mm, 15mm, 18mm, 20mm and 25mm. Existence of flowers and diameters should be specified for each order separately.
We can create lamps of any form and with any bend, and also any length in the range from 3sm to 300sm with an accuracy of millimeter. With such characteristics of production we are able to meet any design requirements, even the most courageous.
Lamps are connected among themselves and don’t need a contour of preliminary heating.
Installation is simple and doesn’t demanda lot of time: some lamps, including, different sizes which sum of power doesn’t exceed power unit power can be connected to each power unit.
This world presented by color temperatures from 2.400K to 9.500K with the minimum intervals between them is suitable for creation of any environment.
It should be noted excellent stability of color and the color rendition (Color rendition coefficient) to 94. This luminescent world is presented by tens shades in the range from 1.900 ° to 10.000 °K.
It is necessary to add unique color scale of our color lamps to it. They are presented in more than 40 “light” flowers received from special phosphors and valuable glass (Muransky glass).
Taking into account these characteristics our production perfectly is suitable for illumination of shops, exhibition areas, the museums and any architectural space where exact vision of color is an integral part of the qualitative project of lighting.
Lamps with the cold cathode guarantee an excellent constant luminescence in installations with the reflected light. The technology of production of the cold cathode levels the effect of a shadow (shadow gaps and hot sposts) arising because of intermittence of the radiation and heat developed by electrodes of a classical luminescent lamp (neon).
Lamps with the cold cathode are connected to the equipment which can control a light stream by means of classical systems of dimmering (1-10V, DALI, etc.). Service life is estimated approximately at 100.000 o’clock. Continuous inclusions and switching off, effect of flash or any other play of light don’t influence lamp service life duration in any way.
The lamps with the cold cathode possessing these characteristics are considered as one of the most durable light sources of all scale presented at the moment in the market.
Our decisions don’t create a radio noise, they can be realized irrespective of existence in perimeter of other electronic devices, including, highly sensitive.
Working temperature of our lamps can reach such indicators which are considered unacceptable for production of other producers, from -40 ° to +80 °C. They are ideally suited both for internal, and for external interiors.
In view of the lowered thermal radiation in comparison with usual luminescent lamps at the identical power consumption, our lamps are suitable for installation in rooms, small on the area, including, near the thermodegrading or valuable materials.
The cold cathode (cold cathode) is an ideal compromise of the price quality for any lighting installations, costs of which maintenance.